KVM over IP Module
29 / 99
Video Settings through the remote console
Figure 4-7 Video Settings Panel
Brightness
Controls the brightness of the picture
Contrast
Controls the contrast of the picture
Clock
Defines the horizontal frequency for a video line and depends on the
video mode. Different video card types may require different values here. The
default settings in conjuction with the auto adjustment procedure should be
adequate for all common configurations. If the picture quality is still bad after
auto adjustment you may try to change this setting together with the sampling
phase to achieve a better quality.
Phase
Defines the phase for video sampling, used to control the display quality
together with the setting for sampling clock.
Horizontal Position
Use the left and right buttons to move the picture in
horizontal direction while this option is selected.
Vertical Position
Use the left and right buttons to move the picture in vertical
direction while this option is selected.
Reset this Mode
Reset mode specific settings (Clock , Phase and Position) to the
factory-made defaults.
Reset all Modes
Reset all settings to the factory-made defaults.
Save changes
Save changes permanently
Undo Changes
Restore last settings
• Refresh Video
Click to run this menu item for retrieving the whole video again from the controlled host
and displayed on Remote Console. In normal situation, only changed parts of video will
