29
On the same page, NumaRAID Fibre Channel Ports presents a list of the ports on the QOS
8’s Fibre Channel HBA. The Link Status and Link Speed are useful for troubleshooting Fi-‐
bre Channel connection problems. Up status refers to a connection that is in-‐use and
online, and down refers to a link that is offline. The Link Speed lists the maximum possi-‐
ble bandwidth of the port on the HBA card.
Chapter 3: Changing the IP Address of the QOS Ethernet Ports
To configure the Ethernet IP Addresses of the ports on the QOS to work in DHCP mode, or
another static IP address than the default, use the NumaRAID Adapter settings (see Chap-‐
ter 2.14 Adapters), or if this isn’t possible access the Linux part of the QOS MDC server
using direct keyboard and monitor connection to the back or SSH protocol and the login
information username: root password: rdserdse. Type in the Linux command:
system-‐config-‐network-‐tui
Use the arrow keys to select an Ethernet port to configure, port 0 or port 1 and press En-‐
ter.
This command will start up the application used to configure the IP settings of the QOS.
Choose the Ethernet port to configure (eth0, eth1) and enter the desired IP, Subnet and
QOS 8-Bay User Manual
QOS Server is a subsidary of Ocean Tides Productions Ltd. © Copyright 2013
