SERTEL T-GPS-300, Operation Manual

Page: 69 / 132

63
36.
PULSE OUTPUT AND PFC OUTPUT
SERTEL provided Contact pulse output from Signal conditioner for 1 PPS, 1PPM , 1
PPH ,1PPD. ( 5 Sec, ½ H Pulse output ) The Contact pulse outputs are fully isolated
outputs. All Contact pulse output are Programmable Output. Pulse Output Duration
20 msec to 1 second duration set by During engineering at site condition
Rear side of the Pulse Output Signal Conditioner, BNC Connector or Selector Switch
With Terminal / BNC Connectors are provided for Pulse / PFC Output.
Specified output like 1 PPS, 1PPM, 1PPH, 1PPD required user tap from required o/p
Through BNC Connector.
Pulse Signal Conditioner Rear Side Selector Switch or Thump wheel Provision
Available please select the following procedure.
37 . SELECTOR SWITCH SELECTION :
For example
(a) Selection of SECOND contact output
Simply turn any one of
selector knob to Sec location every Second one contact available
At connector
(b) Selection of Minute contact output
Turn the knob to Min location every Minute conduct available at Connector
(b) Selection of Hour
Turn the knob to Hour location every Hour available at Connectors
(c) Selection of Day
Turn the
knob at Day location every day (24
TH
hour available at Connectors