SERTEL T-GPS-300, Operation Manual

Page: 70 / 132

64
38 .
THUMP WHEEL PULSE SELECTION
PFC / PULSE FIELD PROGRAMMING PROCEDURE,
•
TURN-ON LOCK SWITCH,
•
SET RELAYS TO PROGRAM ON THUMBWHEEL
•
SELECT REQUIRED OUTPUT AS BELOW SETTING
•
TO REGISTER, ENTER THE PUSH SWITCH
•
RL 01 TO 10 THUMBWHEEL FOR RELAY SELECTION
•
PC 1 TO 5 PULSE DURATION SELECTION
•
TURN OF LOCK SWITCH.
THUMBWHEEL PROGRAMING FOR PULSE SELECTION TABLE
DURATION
SELECTION
RL-1 R L-2 R L-3 R L-4 R L-5 R L-6 R L-7 R L-8 R L-9 RL-10
SECOND
01 1 02 1 03 1 04 1 05 1 06 1 07 1 08 1 09 1 10 1
MINUTE
01 2 02 2 03 2 04 2 05 2 06 2 07 2 08 2 09 2 10 2
½ HOUR
01 3 02 3 03 3 04 3 05 3 06 3 07 3 08 3 09 3 10 3
HOUR
01 4 02 4 03 4 04 4 05 4 06 4 07 4 08 4 09 4 10 4
DAY
01 5 02 5 03 5 04 5 05 5 06 5 07 5 08 5 09 5 10 5
For example
(d) Selection of SECOND in 1
st
Relay contact output
Simply turn RL Thumbwheel in 01 and PC in 1 Every Second Contact Available at 1Marked Output
Connector
(b) Selection of MINUTE in 2 Relay contact output
Simply turn RL Thumbwheel in 02 and PC in 2 Every Minute Contact Available at 2Marked Output
Connector
(e) Selection of ½ Hour Relay Contact at 3 Relay output
Simply turn RL Thumbwheel in 03 and PC in 3 Every ½ hour Contact Available at 3Marked Output
Connector
(f) Selection of Hour at Relay Contact output at 07 output
Simply turn RL Thumbwheel in 07 and PC in 4 Every Hour Contact Available at 7Marked Output
Connector
(g) Selection of Day at Relay Contact output at 05 output
Simply turn RL Thumbwheel in 05 and PC in 5 Every DAY Contact Available at 5Marked Output
Connector
RELAY CONTACT OUTPUT &
PULSE