SERTEL T-GPS-300, Operation Manual, Page: 49 / 132

43
27. To Set TIME
- Set the DATE/ TIME TOGGLE S/W to TIME POSITION.
- Set the time through THUMBWHEEL SWITCH marked HH,MM,SS.
Example;
To set 10 HRS, 30 MNTS & 30 SECONDS
/-------------------------------------------\
| -- | 1 | 0 | 3 | 0 | 3 | 0 |
\-------------------------------------------/
-- H H M M S S
-- Enter the Value by pressing the enter push button
„
After setting these, turn the RESET LOCK to OFF position and remove the
key. This is to prevent inadvertent resetting of the clock when the enter push
inadvertent resetting of the clock when the Enter push button s/w is
accidentally pressed.
** Note
Above procedure only discounting the GPS signal input to Master clock
When GPS Receiver Connected With Master Clock
By entering Master clock Thump Wheel Setting. Time and Date Master clock
not responding