22
NOTE
The use of parts and service procedures
other than Serial 1 approved parts and
service procedures or performing any work
that may be deemed as “tampering” may
void the limited warranty.
Tampering is defined as “purposefully
removing or replacing the internals or
externals of your eBicycle or components
in a way that may alter the original design
or function.”
Battery Maintenance
The battery is designed only to work with a
Serial 1 eBicycle. Use of the battery for any
other purpose will void the warranty and
can cause harm to property and people.
There is no special maintenance required
for a Serial 1 eBicycle battery.
CAUTION
Handle the battery with care. Do not
drop or impact the battery. Mishandling
the battery could lead to severe damage
or over-heating. In rare cases, a
mishandled or severely impacted
battery could potentially catch fire. If
you suspect damage to your battery,
contact Serial 1 immediately.
Batteries are water-resistant for normal
storage and riding conditions but are not to
be fully submerged.
Store the battery in less than 80% relative
humidity and within a temperature range of
14°F to 113°F [-10°C to 45°C]. If a battery
will sit idle for longer than 3 months, it
should be fully charged prior to storage
and again after every subsequent 3
months in storage.
Discontinue use of a battery that has
damage due to impacts, falls, or other
compromises to the integrity of the case or
its contents.
Drivetrain Maintenance
The carbon drive belt on the Serial 1
eBicycle only requires occasional
tensioning, as outlined in the Regular
Service Intervals.
Table 5: Drive Belt Tension
Model
Smooth
Rough
MOSH/CTY
45 to 60 Hz
[35 to 45 lbs]
60 to 75 Hz
[45 to 53 lbs]
RUSH/CTY
35 to 50 Hz
[28 to 40 lbs]
EN
