24
Cleaning
Wipe the external surfaces of your eBicycle
with a damp cloth.
CAUTION
Do not use a pressure washer to clean
your eBicycle. Using a pressure washer
can result in equipment damage.
Lamp Service
All lamps are sealed units, without access
to individual light bulbs. Service on a lamp
requires the entire lamp unit to be
replaced.
Regular Service Intervals
Service must be performed at specified
intervals to keep your eBicycle operating at
peak performance.
NOTE
-
Perform maintenance more frequently
in severe riding conditions such as
extreme temperatures, dusty
environments, rough roads, long
storage conditions, short runs, or
heavy stop & go traffic.
-
Perform spoke tension check at every
10 hours or after a hard ride over
rough roads.
-
Regular maintenance needs to
continue for the entire time the
eBicycle is owned.
CAUTION
As with all mechanical components
subjected to wear and stresses, fatigue
will occur. If the design life of a
component has been exceeded,
it may
suddenly fail, possibly causing injury or
damage. Regular servicing can help
identify potential issues. The following
table is a minimum recommendation.
EN
