NORMAL OPERATION
3
SERFAS E-BIKE OWNER’S MANUAL
6
BF-DM-C-DP C18-EN November 2019
7.7 NORMAL OPERATION
7.7.1 Switching the System ON/OFF
Press and hold
(>2S) on the display to turn on the system. Press and hold
(>2S) again to turn
off the system.
If the "automatic shutdown time" is set to 5 minutes (it can be set with the "Auto Off" function, See
"Auto Off"
), the display will automatically be turned off within the desired time when it is not in op-
eration. If the password function is enabled, you must enter the correct password to use the system.
7.7.2 Selection of Support Levels
When the display is turned on, press the
or
(<0.5S) button to switch to the support level, the
lowest level is 0, the highest level is 5. When the system is switched on, the support level starts in
level 1. There is no support at level 0.
7.7.3 Selection Mode
Briefly press the
(0.5s) button to see the different trip modes.
Trip: daily kilometers (TRIP) - total kilometers (ODO) - Maximum speed (MAX) - Average speed (AVG) -
Range (RANGE) - Energy consumption (CALORIES(only with torque sensor fitted)) - Travel time (TIME).
7
BF-DM-C-DP C18-EN November 2019
DEALER MANU
AL FOR DISPL
A
Y
7.7.4 Headlights / backlighting
Hold the (>2S) button to activate the headlight and taillights.
Hold the (>2S) button again to turn off the headlight. The brightness of the backlight can be set
in the display settings
"Brightness"
. If the display /Pedelec is switched on in a dark environment,
the display backlight/headlight will automatically be switched on. If the display backlight/headlight
has been manually switched off, the automatic sensor function is deactivated. You can only turn on
the light manually. After switching on the system again.
7.7.5 ECO/SPORT Modus
Press and hold the
(<2S) Button, to change from ECO mode to Sport mode.
(Depending on the version of the pedelec manufacturer)
