background image

9

SERFAS E-BIKE

11

    BF-DM-C-DP C18-EN November 2019

DEALER MANU

AL FOR DISPL

A

Y

7.8.1.8 “SOC View”  Battery view in volt 

percent

Press the 

 or   (<0.5S)  button to 

highlight “SOC View” in the Display settings 
menu, and then press 

 (<0.5S) to select. 

Then with the 

 or   button choose 

between “percent” or “voltage “. Once you 
have chosen your desired selection, press 
the 

 (<0.5S) button to save and exit to the 

"Display setting" 

7.8.1.9 “TRIP Reset”  Reset mileage

Press the 

 or   (<0.5S) button to high-

light “TRIP Reset” in the Display settings 
menu, and then press 

 (<0.5S) to select. 

Then with the 

 or   button choose 

between “YES” or “NO”. Once you have 
chosen your desired selection, press the 

 (<0.5S) button to save and exit to the 

"Display setting" 

7.8.1.10 “AL Sensitivity”  Automatic 

headlight sensitivity

Press the 

 or   (<0.5S) button to high-

light “AL-Sensetivity” in the Display settings 
menu, and then press 

 (<0.5S) to select. 

Then with the 

 or   button choose be-

tween "0" / " 1" / " 2"/ "3" / "4"/ "5"/ "OFF”. 
Once you have chosen your desired selection 
, press the 

 (<0.5S) button to save and 

exit to the "Display setting" 

7.8.1.11 “Password”

Press the 

 or   (<0.5S) button to choose  

Password in the menu. Then by briefly 
pressing 

 (<0.5S) to enter the password 

selection. Now again with the 

 or   

(<0.5S) buttons highlight “Start Password" 
and press the 

 (<0.5S) button to confirm. 

Now again using the 

 or   (<0.5S) 

Button choose between “ON” or “OFF” and 
press the 

 (<0.5S) button to confirm. 

Now you can input your 4-digit pin code. By 
using the 

 or   (<0.5S)  button choose 

numbers between "0-9". By briefly pressing 
the 

 (<0.5S) button you can move on to 

the next number.

After entering your desired 4-digit code, 
you must re-enter the 4-digits you chose, to 
ensure the code is correct.

After selecting a password, the next time 
you turn on the system it will ask you to 
input your password. Press the 

 or   

(<0.5S) button to select the numbers, Then 
press briefly 

 (<0.5S) to confirm. 

After entering the wrong number three 
times, the system switches off. If you have 
forgotten the password, please contact your 
retailer. 

Summary of Contents for E DASH PLUS 500W
































Reviews: