99
Query/Control the peripheral components status (Operator,
combination CGI)
Notes: This combination CGI command will replace the separated peripheral control
CGIs.
Query the peripheral components status
Method: GET
URL:
http://<ip>/io/query_pc.cgi[?<parameter>[&<parameter>...]]
Input parameters:
None parameter provided, CGI responds all supported peripherals' status.
The peripheral parameter provided, CGI just responds the specific peripherals'
status. Please refer to the “
Parameter Pairs Table
” for specific input parameters.
Return:
HTTP/1.0 200 OK \r\n
…
content-type: text/plain\r\n
\r\n
<parameter pair>\r\n
<parameter pair>\r\n
......
Here are the details of parameter pairs,
parameters depend on product models.
“error” value response indicate that “Failed to query/control the peripheral
equipments”
Parameter Pairs Table
Parameter Get/Set
Value
and
description
privacy_button
Query
only
Privacy button status, valid values: [disabled|off|on]
pir
Query
only
PIR status, valid values: [disabled|actionless|active]
light_sensor
Query
only
Light sensor status, valid values: [disabled|night|day]
pt_position
Query
only
Query current Pan & Tilt position, because the MCU can’t get
response from PT, so the values maybe wrong under some
conditions. Format is “X,Y”
“X” is the Pan position; “Y” is the Tilt position.
input_1
input_2
Query
only
Input #1,#2 status, valid values: [high|low]
output_1
output_2
Get &
Set
Onput #1,#2 status,
Query format is “A,B”.
“A” valid values: [high|low]
“B” valid values: [pulse|static]
Control format is “A”.
“A” valid values: [high|low]
