Sercel GRC DATA PRO, Operation Manual, Page: 52 / 93

Data Pro P/N 10029355 Rev AE
Operation Manual Page 52 of 92
8.7.7 Factory Default Reset
To execute this feature, select the following menu steps:
Menu

System

Factory Default Reset

OK
Clicking on
‘
Factory Default Reset
’
initiates the closing of the Data Pro application and then opens it
back up with the EULA form ( Figure 50
). The user checks on “I Agree” to proceed with the opening of
the Data Pro application.
Figure 50
– End User License Agreement Window
This feature enables the user to restore the factory default settings ( Table 11 ). The execution of this
feature overwrites the existing configuration file, which means loss of configuration setting on relays,
analog inputs, analog outputs, and communication ports. No logging data is lost by a factory reset. To
remove the log data, the user must proceed to the logging data menu and delete the data.
Parameter Setting
Menu Password 1234
Menu Timeout in seconds 300
Auto Toggle Tabs Enabled
Pressure Units Psia
Temperature Units F
Pressure and Temperature decimal places 1
Sample Rate in seconds 60
Relay#1 and Relay#2 Off
Analog Out #1 and #2 Disabled
Table 11
– Data Pro Default Configurations