Sequential Prophet Rev 2 User Manual Download

Page: 3 / 58

Tested to Comply

With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful inter-

ference and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numerique de la classe B respecte toutes les exigences du

Reglement sur le materiel brouilleur du Canada.

For Technical Support, email:

[email protected]

Table of Contents

A Few Words of Thanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Sound Banks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Selecting Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Editing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Comparing an Edited Program to its Original State . . . . . . . . . . . . . . 3

Creating a Program from Scratch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Saving a Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Canceling Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Naming a Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Working with Stacked or Split Programs . . . . . . . . . . . . . . . . . . . . . . 6

Moving to the Next Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Global Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Oscillators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Oscillator Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Filter Envelope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Amplifier Envelope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Auxiliary Envelope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Low Frequency Oscillators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Modulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Modulation Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Modulation Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Summary of Contents for Prophet Rev 2



























































Search results

Summary of Contents for Prophet Rev 2

Reviews:

Related manuals for Prophet Rev 2

Brands by name

Popular brands

Sequential Prophet Rev 2, User Manual

Search results

Summary of Contents for Prophet Rev 2

Reviews:

Related manuals for Prophet Rev 2

Brands by name

Popular brands