Sequential Prophet Rev 2 User Manual Download

Page: 5 / 58

A Few Words of Thanks

Thank you for purchasing the Prophet Rev2, the successor to our popular Prophet ’08

synthesizer, which has been a workhorse in the music industry for nearly 10 years.

As enduringly popular as the Prophet ’08 has been, we felt it was time to update it

with new technology and new features.

To that end, we designed the Prophet Rev2 by enhancing and improving every-

thing we could about the original Prophet ’08 and, in many cases, doubling its

power. We took the classic sound of the Prophet ’08’s DCO and Curtis-filter-based

voice and added powerful new features that the original never had, such as wave-

shape modulation, digital effects, an expanded modulation matrix, a polyphonic step

sequencer (in addition to its original gated step sequencer), a more intuitive user inter-

face, USB connectivity, and more. The result is a modern classic revisited.

Creating the Prophet Rev2 has been a very satisfying adventure in making a good

synth even better. Create some great sounds with it!

Cheers,

SOUND DESIGN
Joseph Akins, Rory Dow, Peter Dyer, Josh Eustis, Peter Gorges, Mike Hiegemann,

Tim Koon, Kurt Kurasaki, Kevin Lamb, Cord Mueller, Drew Neumann, Bob Oxley,

Francis Preve, Lorenz Rhode, Nick Semrad, Huston Singletary, James Terris, and

Mitch Thomas.

THE SEQUENTIAL CREW
Art Arellano, Fabien Cesari, Bob Coover, Carson Day, Chris Hector, Tony Karavidas,

Mark Kono, Justin Labrecque, Andy Lambert, Michelle Marshall, Andrew McGowan,

Joanne McGowan, Julio Ortiz, Tracy Wadley, and Mark Wilcox.

Special thanks to Robert Rich for the alternative tunings content.

Summary of Contents for Prophet Rev 2



























































Search results

Summary of Contents for Prophet Rev 2

Reviews:

Related manuals for Prophet Rev 2

Brands by name

Popular brands

Sequential Prophet Rev 2, User Manual

Search results

Summary of Contents for Prophet Rev 2

Reviews:

Related manuals for Prophet Rev 2

Brands by name

Popular brands