manualshive.com logo in svg

Sepson FORCEMATIC, User Manual

Share
Download
Sepson FORCEMATIC User Manual Download Page 45

WORLD CLASS WINCHES

RELIABLE - DEPENDABLE - UNCOMPLICATED

44

Winch basics

4.1.6   Pressure setting of the control valve PVG 32

Note

The control valve is preset from the factory and should be adjusted for each 

installation.

Adjustment point “Pressure setting”

Measuring point

Note

          Only authorized personnel are allowed to adjust the Pressure setting. 

1. Remove the protection cap for the adjustment point.
2. Remove the plug and connect a pressure gauge outlet and a manometer at to  

  the measuring point.

3. Pay out the rope to the first rope layer. Connect the wire rope to a fixed object 

 

  via a load cell. Pull until the winch stalls. Compare the load cell value to the  

  winch maximum pulling force according to the technical data.
4. To increase the oil pressure turn the setting screw clock wise or to decrease the  

  oil pressure turn the setting screw anti-clock wise.
¼ turn = 30 bar 

½ turn = 60 bar 

Full turn = 120 bar

Summary of Contents for FORCEMATIC




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands