manualshive.com logo in svg

Sepson FORCEMATIC, User Manual

Share
Download
Sepson FORCEMATIC User Manual Download Page 13

WORLD CLASS WINCHES

RELIABLE - DEPENDABLE - UNCOMPLICATED

12

2.6   Personal Protective Equipment

It is absolutely essential that the operator uses the appropriate and required safety 

equipment when working with the equipment.

Protective clothing should protect the operator(s) against oil and shield from  

accidental contact with the wire rope. Avoid loose clothing that may be caught in the 

winch or the wire rope and cause serious injury.
Personal safety equipment does not eliminate the risk of injury but reduces the risk 

and effects in case of an accident. It is only the user’s awareness of all safety risks 

and his/her own judgment that will provide the necessary safety margins against 

personal injury.

Protective clothing

Head protection

 (Hard hat)

Eye protection

 (Goggles)

Hand protection

 

(Heavy duty gloves when handling the 

rope and rubber gloves when working 

with oil)

Safety boots

 

(Steel tipped and slip resistant sole)

Safety

Summary of Contents for FORCEMATIC




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands