This Document cannot be used without the authorization of SEOWO
NINTECH
35
05 Run [MS-DOS] or [Command Prompt] and then perform
PING Test with [192.168.1.100]
A message [Reply from 192.168.1.1: bytes=32 time=1ms TTL=64] should appear
when running [ping 192.168.1.1] command. If the result of the Ping test does not arrive
properly, please contact the Customer Support Center.
- Enter [192.168.1.100] for [IP Address], [255.255.255.0] for [Subnet Mask], and [192.168.1.1]
for [Default Gateway].
- Click [Use the following DNS Server Address].
- For [Basic Setup DNS Server], enter the communication company server of each country.
- Click [OK]. Click [OK] again in the [Local Area Connection Properties] window.
For Windows XP
- [Start -> Control Panel -> Network and Internet Connection], double-click [Local Area
Connection], and click [Properties]. Click Properties of [Internet Protocol (TCP/IP)] among
Components.
- Click [Use the following IP address].
- Enter [192.168.1.100] for [IP Address], [255.255.255.0] for [Subnet Mask], and [192.168.1.1]
for [Default Gateway].
- Click [Use the following DNS Server Address].
- For [Basic Setup DNS Server], enter the communication company server of each country.
- Click [OK]. Click [OK] again in the [Local Area Connection Properties] window.
For MAC OS X
- From the “Apple” menu, Choose “System Preference..“
- Click on the [Network] icon in the [Internet & Network] category.
- Click on the [Ethernet] option from the left hand side of the Network setting window.
- Select [Manually] option from the [Configure] drop-down menu.
- Enter [192.168.1.100] for [IP Address], [255.255.255.0] for [Subnet Mask], and [192.168.1.1]
for [Router].
- For [DNS Server], enter the communication company server of each country.
- Click [Apply].
