SEOWON INTECH SWC-5x00W series User Manual Download Page 18 | Manualshive

Page: 18 / 44

background image

SEOWONINTECH Proprietary-Contents may change without notice

18

02 WiFi DHCP

CPE Setup on the web page

WiFi DHCP can be configured when WiFi Bridge Mode is disabled.

■

Select “WLAN” → “WiFi DHCP” from the menu.

■

Configure a WiFi IP Address

      WiFi IP address is used in the wireless LAN that CPE manages.
      Configure LAN IP address in “IP Address/Subnet Mask” text boxes.
      Initial Value is “192.168.2.1/255.255.255.0” and only last byte in “Subnet Mask”

box can be modified.

■

Configure WiFi DHCP Server

DHCP server should be enabled for the purpose of leasing IP address to the computer

      connecting to CPE via WiFi.
      Setup Maximum lease time (in seconds), IP Starting address, Number of users and
      WINS server address.

■

Finish setup by clicking the “Save” button. Then, you will be moved to the Rebooting Screen.

■

If you have finished CPE setup and want to reboot the CPE, click “Yes” button to

reboot the CPE.

■

Changed configuration is applied after rebooting the system.

«
...
16
17
18
19
20
...
»

Summary of Contents for SWC-5x00W series













































Reviews:

No comments

Related manuals for SWC-5x00W series

Brand: D-Link Pages: 10

Brand: D-Link Pages: 17

Brand: ICP DAS USA Pages: 71

Brand: Yeastar Technology Pages: 15

Brand: Ubee Pages: 119

Brand: Stahl Pages: 64

Brand: Sencore Pages: 37

Brand: Zte Pages: 13

Brand: Banner Pages: 110

Brand: Funkwerk Pages: 594

Brand: Broadxent Pages: 104

Brand: Exegin Pages: 84

AMG1001-T Series

Brand: ZyXEL Communications Pages: 183

Brand: AirLive Pages: 163

Brand: URC Pages: 16

Brand: Viola Systems Pages: 53

Brand: RTA Pages: 66

Brand: Zte Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands