SEOWONINTECH Proprietary-Contents may change without notice
34
01 Check the status of external type modem.
02 Check the LED status of CPE.
03 Check the IP address of PC.
04 If IP Address is not normal - Set the IP Address of the PC manually.
Trouble Shooting
- Check that the Link lamps of cable, modem are illuminated.
- Check that the POWER LED is illuminated.
- Check if the LEDs of WiMAX are illuminated.
- For LAN port, check that the lamp of the port connected to the PC is illuminated.
For Windows 98/ME
- Click [Start] >> [Run] and enter the [winipcfg] command to open the [IP Address]
window, and then check the [IP Address].
For Windows 2000/XP
- Run [Command Prompt] and enter the [ipconfig] command to check the [IP address].
For Windows 98/ME
- Execute [Run >> Control Panel >> Network], and then click Properties of [TCP/IP] for LAN card.
- Check [Use the assigned IP address], enter [192.168.1.100] for [IP Address] and
[255.255.255.0] for [Subnet Mask].
- Select [Gateway] and enter [192.168.1.1] for [New Gateway], and then click [Add].
- Select [DNS Configuration], check [Use DNS], enter any name for [Host], enter [DNS Server
Address to search], and click [Add].
- Click [OK], click [OK] again in the [Network Properties] window, and then click [OK]
from
the [Change System Setup] window to reboot the PC.
For Windows 2000
- Execute [Start -> Control Panel -> Network and Dial-UP Connections], double-click
[Local Area Connection], and click [Properties].
- Click Properties of [Internet Protocol (TCP/IP)] among Components.
- Click [Use the following IP address].
Actions to be taken when the Internet is disconnected
