ECO: 102-0461-01
S-4014
Rev B
31
6. Press the adapter plate assembly firmly to ensure
the white Velcro hook adheres to the inside wall
of the blower. Then gently pull the blue fabric
strap to pull the plate assembly out of the unit.
The Velcro hook (color white) should remain
adhered to the inside of the blower. Verify that
the Velcro loop strip (black) is still firmly
attached to the back of the adapter plate.
7. Set the Alkaline Battery Adapter plate aside and
use your thumbs to apply pressure across the
Velcro hook (white) inside the blower to insure it
is securely adhered.
8. Install five Duracell D-Cell batteries into the
Alkaline Battery Adapter. (NOTE: USE
ONLY DURACELL D-CELL ALKALINE
BATTERIES!)
a.
Only remove and install the batteries
when the Alkaline Battery Adapter Plate
is removed from the blower.
b. Be sure to pay attention to the polarity (+
or -) direction engraved into the back plate
to insure correct battery orientation. This
is very important to ensure the blower
operates properly.
Velcro Loop on Back of
Adapter Plate
Alkaline Battery
Adapter with
Batteries Properly
Installed