6300-Series Remote Display
SenSource, Inc.
• Youngstown, OH U.S.A.
www.sensourceinc.com • 800.239.1226
Rev. 5/24/2013
25
6.1.5 Stop & Reset
Stops Timer and Resets it
6.1.6 Reset & Start
Resets Timer and Starts it
6.1.7 Start/Stop/Reset
Alternate starts and stops timer, resetting each time
6.1.8 One-Button Mode
1st press starts timer, 2nd press stops timer, 3rd press performs Input 2 Action
6.2 Input 2 Action
Determines what action occurs when Input 2 is activated.
6.2.1 Stop
Stops Timer
6.2.2 Start
Starts Timer
6.2.3 Start/Stop
Alternate starts and stops timer
6.2.4 Reset
Resets timer
6.2.5 Stop & Reset
Stops Timer and Resets it
6.2.6 Reset & Start
Resets Timer and Starts it
6.2.7 Start/Stop/Reset
Alternate starts and stops timer, resetting each time
6.3 Pushbutton/Voltage
Sets whether the display should source 5V to monitor buttons, or it should accept 5V (TTL level) from an external input.
6.3.0 Push buttons
Buttons at input, no external voltage applied
6.3.1 Voltage
A 5V signal may be applied.
Caution:
Ensure the grounds between the display and the sending device are properly tied
together.
Do not exceed 5.5V.
6.4 N.O./N.C.
Defines the default state of the inputs: normally open or closed.
6.4.0 Normally open
Contact: doorbell. Voltage: 0V.
6.4.1 Normally closed
Contact: N.C. relay. Voltage: V.5
