6300-Series Remote Display
SenSource, Inc.
• Youngstown, OH U.S.A.
www.sensourceinc.com • 800.239.1226
Rev. 5/24/2013
17
S
E T TI NG TH E
P
R O G RA M M A BLE
O
P TI ON S
O
P T I O N S
- P
R O G R A M M A B L E
The 6300 has been designed to allow the user to control almost every aspect of the displays behavior. In order to change
the behavior of the display you change the value of a specific parameter in the display's non-volatile memory. Any changes
made to the display's memory will be stored even when the display does not have power. A map of the configurable
memory options is shown in the options table summary on the following page. A detailed description of each value can be
found in the “Options Definitions” section. The memory map has been broken into six main sections.
Section 1
Sections 1.1 - 1.5
store multiple number values representing the following: current time, current date, reload time, chime
time 1, and chime time 2.
To change values in these areas simply press [Menu] followed by the area number (i.e. [Menu] "12" to change the date).
Then press [Enter]. Next, type in up to six digits of the value representing the time or date followed by enter (i.e., if setting
time to 3:00, type “300” [Enter]).
Section 1.6
is a special “Quick Set section.” It is actually not a memory area at all but a function that sets all other memory
areas to a factory “default” condition. For instance if you want to set all memory areas to what SenSource considers normal
for a wall clock, type [Menu] "210" [Enter]. This will reset all of the necessary memory locations (sections 2 through 6 ) to
“default” settings for a given mode.
Sections 2 - 6
Sections 2 - 6
are straightforward single number memory locations. For instance, area 2.1 can have a value of 0 to 5,
whereas area 2.2 can have a value of 0 to 1. See the options table summary for allowable values for each area. Use these
areas to alter the details of how the display behaves.
Examples of Changing Values in Areas 2 - 6
To make the internal chime louder increase the value in area 3.3. Press Menu, 3, 3, 9 (for highest volume) enter.
To make the display chime momentarily when it reaches zero in countdown mode, change area 5.3 to a value of 1.
Press [Menu] "531" [Enter].
