Operating manual Fx9x
.
I. Description of device
FR90ILA / FR91ILA (measurement of distance to reflector)
The
SmartRange
sensors
FR90ILA and FR91ILA
are optical distance measuring devices which detect the
distance to a reflector down to the millimetre in seconds. The measured values are made available via integrated
digital standard interfaces.
The sensors operate according to the principle of pulsed time of flight measurement.
They are particularly suitable for use in applications involving the positioning of cranes, high bay stackers as well
as in high-rise and small-parts warehouses. The
FR90ILA
and
FR91ILA
devices differ in performance data (see
the chapter on technical data).
FT90ILA / FT91ILA (measurement of distance to object)
The
SmartRange
sensors
FT90ILA and FT91ILA
are optical distance measuring devices which measure the
distance down to the millimetre in seconds. The measured values are made available via integrated digital
standard interfaces.
The sensors operate according to the principle of pulsed time of flight measurement.
They are particularly suitable for use in many applications in automation technology where parts must be detected
or measured over long distances. The
FT90ILA
and
FT91ILA
devices differ in performance data (see the chapter
on technical data).
SmartRange
sensors are equipped with the following:
♦
LCD display and 3 buttons for complete on-site set-up
♦
RS422 interface
♦
SSI compatible interface (GRAY or BIN, 24 or 25 bit)
♦
2 signal outputs and an error and plausibility output
♦
Bus communication with external bus adapter
♦
One 0 to 20 mA analogue output (only with FT90ILA und FT91ILA)
Appropriate use
SmartRange
sensors are optical measuring systems for the measurement of distances
and
must only be used for this purpose.
NEVER use these sensors in applications where human safety is at risk.
Laser safety information
The sensor is equipped with a red light pilot laser, laser safety class 2, for alignment purposes.
The measuring laser is an infrared laser belonging to laser safety class 1.
Operating mode: Laser safety class 1
Wave length
λ
:
650
nm
Maximum power P
max
:
3 mW
Impulse duration t
p
:
0.3 µs, T: 1 µs
EN 60825-1, 03/97
Set-up mode: Laser safety class 2
Never look into the beam !
Contents of delivery
The following is supplied in the standard delivery:
♦
SmartRange
sensor
Fx9xILA
♦
Operating manual
SensoPart Industriesensorik GmbH, D-79695 Wieden, Tel. +49 (0)7673 821-0 Fax +49 (0)7673 821-30 www.sensopart.de
Page 2
Status 21.10.2004 Software 1.51 and higher 068-13621
