40
4. To go to the previous record (decrease the record number), press and release the
C
button.
To go the next record (increase the record number), press and release the
B
button.
5. 5. Press and release the
A
button once to return to the User Menu, or twice to return to
the working display.
CO LOG
LOG SIZE:
4,096
OPTIONAL FEATURE
Any time a
CO TEST is performed using the
SENSIT GOLD G3
, a log of that test is automatically
saved in the internal memory of the instrument. When the log memory is full, the oldest record
will be overwritten.
For information on how to perform a
CO TEST, see that section in this manual.
TO VIEW THE CO LOG:
1. From the working display, press and hold the
B
button until
USER MENU is shown near
the top of the display.
2. Press and release the
C
button until
CO LOG is shown. If you do not see this option in
the user menu, it may be disabled per the factory configuration of your instrument. Contact
SENSIT Technologies
for assistance.
3. Press and release the
B
button to select and enter the
CO LOG menu.
The most recent record will be displayed. The top of the screen will list “Record __” with the
record number. Each record contains the date/time of the CO Test and sensor outputs at
that time. GPS coordinates (if equipped).
4. To go to the previous record (decrease the record number), press and release the
C
button.
To go the next record (increase the record number), press and release the
B
button.
5. Press and release the
A
button once to return to the User Menu, or twice to return to the
working display.
DATA LOG
LOG SIZE: 180,224
OPTIONAL FEATURE
When equipped, at any time when using the
SENSIT GOLD G3
while on the work display or
when any applicable test modes are enabled, a log of gas readings is automatically saved at
a preset time interval (1-60 seconds). These records are stored in the data log, in the internal
memory of the instrument. When the log memory is full, the oldest record will be overwritten.
TO VIEW THE DATA LOG:
1. From the working display, press and hold the
B
button until
USER MENU is shown near
the top of the display.
2. Press and release the
C
button until
DATA LOG is shown. If you do not see this option in
the user menu, it may be disabled per the factory configuration of your instrument. Contact
SENSIT Technologies
for assistance.
3. Press and release the
B
button to select and enter the
DATA LOG menu.
The most recent record will be displayed. The top of the screen will list “Record __” with the
record number. Each record contains the date/time of the Data Log and sensor outputs at
that time.
GPS coordinates (if equipped).
Summary of Contents for GOLD G3
Page 2: ......
