39
SESSION LOG
LOG SIZE:
2,048 records
STANDARD FEATURE
At any time when using the
SENSIT GOLD G3
while on the work display or when any
applicable test modes are enabled, the operator can press and release the
C
button to manually
save a record of the data. “DATA SAVED” will be shown on the display when this is done. These
records are stored in the session log, in the internal memory of the instrument. When the log
memory is full, the oldest record will be overwritten.
Test modes where session logs can be saved, in addition to the normal work display, are:
TICK,
LEAK SEARCH, and PEAK MODE. Other test modes, such as BAR HOLE or CO TEST, have their
own separate logs.
TO VIEW THE SESSION LOG:
1. From the working display, press and hold the
B
button until
USER MENU is shown near
the top of the display.
2. Press and release the
C
button until
SESSION LOG is shown. If you do not see this option
in the user menu, it may be disabled per the factory configuration of your instrument. Con
-
tact
SENSIT Technologies
for assistance.
3. Press and release the
B
button to select and enter the SESSION LOG menu.
The most recent record will be displayed. The top of the screen will list “Record __” with the
record number. Each record contains the date/time of the session and sensor outputs at that
time. GPS coordinates (if equipped).
4. To go to the previous record (decrease the record number), press and release the
C
button.
To go the next record (increase the record number), press and release the
B
button.
5. Press and release the
A
button once to return to the User Menu, or twice to return to the
working display.
BAR HOLE LOG
LOG SIZE:
2,048
OPTIONAL FEATURE
Any time a
BAR HOLE test is performed using the
SENSIT GOLD G3
, a log of that test is
automatically saved in the internal memory of the instrument. When the log memory is full, the
oldest record will be overwritten.
For information on how to perform a
BAR HOLE TEST, see that section in this manual.
TO VIEW THE BAR HOLE LOG:
1. From the working display, press and hold the
B
button until
USER MENU is shown near
the top of the display.
2. Press and release the
C
button until
BAR HOLE LOG is shown. If you do not see this option
in the user menu, it may be disabled per the factory configuration of your instrument. Con
-
tact
SENSIT Technologies
for assistance.
3. Press and release the
B
button to select and enter the
BAR HOLE LOG menu.
The most recent record will be displayed. The top of the screen will list “Record __” with the
record number. Each record contains the date/time of the bar hole test and sensor outputs
at that time. GPS coordinates (if equipped).
Summary of Contents for GOLD G3
Page 2: ......
