Sensia QRATE Scanner 3300, Installation, Operation & Maintenance Manual

Page: 56 / 92

c. Connect the pulse input wiring to PIN 1 to 3, as required. (Wiring on page 54 and specifications on page
11 )
Terminal Block Terminals
PIN 1 (AIN 5) 21(P), 22(+), 23(-)
PIN 2 (AIN 6) 47(P), 48(+), 49(-)
PIN 3 (AIN 7) 50(P), 51(+), 52(-)
d. Connect the process temperature input wiring to RTD 1 or RTD 2, as required. (Wiring on page 54 and speci -
fications on page 10 )
Terminal Block Terminals
RTD 1 30(+), 31(+), 32(-), 33(-)
RTD 2 59(+), 60(+), 61(-), 62(-)
e. Connect analog input wiring to AIN 1 to 7, as required. (Wiring on page 56 and specifications on page 10 )
Terminal Block Terminals
AIN 1 24(P), 25(+), 26(-)
AIN 2 27(P), 28(+), 29(-)
AIN 3 53(P), 54(+), 55(-)
AIN 4 56(P), 57(+), 58(-)
AIN 5 (PIN 1) 21(P), 22(+), 23(-)
AIN 6 (PIN 2) 47(P), 48(+), 49(-)
AIN 7 (PIN 3) 50(P), 51(+), 52(-)
f. Connect analog output wiring to AOUT 1 (HART) (Future) and AOUT 2, as required. (Wiring on page 59
and specifications on page 11 )
Terminal Block Terminals
AOUT 1 9(+), 10(-)
AOUT 2 36(+), 37(-)
g. Connect digital input/output wiring to DIO 1 to 6, as required. (Wiring on page 57 to page 60 and specifi -
cations on page 55 )
Terminal Block Terminals
DIO 1 1(+), 2(-)
DIO 2 3(+), 4(-)
DIO 3 5(+), 6(-)
DIO 4 7(+), 8(-)
DIO 5 40(+), 41(-)
DIO 6 42(+), 43(-)
h. Connect serial communication wiring to SER 1 to 3, as required. (Wiring on page 59 and specifications on
page 9 )
Terminal Block Terminals
SER 1 (RS485) 18(+), 19(-), 20(G)
SER 2 (RS485) 44(+), 45(-), 46(G)
SER 3 (RS485/232) 13(CTS), 14(+TXD), 15(-RTS), 16(GND), 17(RXD)
3. Configure and calibrate the QRATE Scanner 3300.
50
Section 3 QRATE Scanner 3300 integrated control flow computer