Sensear SM1B, Manual

Page: 8 / 46

En
glis
h The SM1P/B headset is designed to be worn with the headset sealing
around the ears. Specific examples of how to fit the headset around the
ears are covered in the next three pages. The fit does alter slightly
depending on what style of brace is used - headband, Behind-the-Neck or
mounted to a helmet directly.
The boom microphone should be placed approximately 5mm (1/4”) in
front of the mouth. Check to ensure the white dot or microphone label is
facing towards you. The orientation is essential as the microphone is
directional. If the microphone faces a different direction, this may lead to a
reduction in transmission quality.
The inline PTT has a rotatable clip behind it to allow it to attach to the
shirt/upper garment. The inline PTT must be connected to the two-way
radio using the multi- pin connector.
FITTING THE HEADSET
It is recommended that the wearer should ensure that.
• The earmuffs are fitted, adjusted, and maintained in accordance with
the manufacturer’s instructions
• The earmuffs are always worn in high noise conditions
If the above recommendations are not adhered to, the protection afforded
by the earmuffs will be severely impaired.
DOC00084 SM1P/B Manual rev 14.00
6