CHARGING
The headset is supplied with an AC adapter that operates globally when
fitted with the appropriate electrical regional adapter. Charging must
only be performed in the safe area.
To charge the headset, follow the steps below:
1.
Plug the Sensear AC adapter into an appropriate power outlet.
2.
Insert the cable end of the Sensear AC adapter into the DC
power socket on the SM1P headset (located on the right-
hand-side of the unit). For intrinsically safe headsets, the DC
pocket is on the left-hand-side of the headset.
3.
The LEDs will flash as indicated below:
Red LED (RHS) blink twice every 5
seconds
Battery low (< 1 hour left)
Red LED solid*
Charging
Green LED solid*
Charge complete
*For intrinsically safe headsets, these LEDs are located on the LHS of the
headset.
Note, when the DC plug is inserted into an IS/Ex headset, the headset will
be in a charge-only state. Other operating features will not be useable.
En
glis
h
DOC00084 SM1P/B Manual rev 14.00
23
Summary of Contents for SM1B
