En
glis
h
“low” is the most sensitive/easiest to trigger VOX, and “high” is the least
sensitive/hardest to trigger VOX.
COMMUNICATING
COMMUNICATING OVER TWO-WAY RADIO:
To Transmit Over the Two-Way Radio:
•
Press and hold the button located on the inline PTT.
•
Release the inline PTT button to cease transmission.
•
To change the volume of the two-way radio communications,
use the two-way radio’s volume controls
NOTE:
•
When the headset is powered off (and disconnected from the
inline PTT), the inline PTT button may not activate the two-
way radio. The PTT located on the two-way radio should be
used.
•
When the headset is powered on, the two-way radio PTT may
not activate the two-way radio
•
Audio will revert to radio when the headset connector is
disconnected (dependent on radio type and compatible SRCK
radio cable)
Two-Way Radio VOX:
VOX can be used on VOX-enabled two-way radios.
Refer to the two-way radio documentation for the setup and use of the
VOX feature. To disable VOX, you can either turn VOX off on the two-way
radio or press the headset PTT once, depending on which two-way radio
model you use.
DOC00084 SM1P/B Manual rev 14.00
16
Summary of Contents for SM1B
