FORWARD
Product Safety and RF Exposure Compliance:
This product is designed to be used in isolation or in conjunction with a
two-way radio. Before using this product with a two-way radio, read the
operating instructions for safe usage contained in the Product Safety and
RF Exposure booklet enclosed with the two-way radio.
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for
help
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
FCC ID: XKS-SM1xSR
IC: 8376A-SM1XSR
FCC ID: QOQWT32I
IC:5123A BGTWT32I
DOC00084 SM1P/B Manual rev 14.00
En
glis
h
28
Summary of Contents for SM1B
