Sensear SM1B, Manual

Page: 14 / 46

En
glis
h
POWER ON:
OPERATING THE HEADSET
1. Press and release the “Power” button shown in Figure 1.
2. All the LEDs will turn on briefly, & an audible sound will be heard
through the headset.
3. The Green LED will flash at a normal rate as described below.
POWER OFF:
1. Press and hold the “Power” button for 2 seconds.
2. All the LEDs will turn on briefly and an audible sound will be heard
through the headset as the headset powers off.
MODE:
When the headset is powered up, the unit is set into ‘ mode’**.
By pressing the power button, this toggles ‘ mode’.
‘ mode’ allows full situational awareness of your surroundings in
addition to two-way radio, Bluetooth®, Short-Range, or face-to-face
communications.
•
The power button toggles between Quiet mode and
mode
•
The volume control buttons can be used to raise or lower the
audio level of the mode
•
**The default mode on powerup can be programmed using
the Sensear app
DOC00084 SM1P/B Manual rev 14.00
12