Sensata Dimensions 141537, Owner'S Manual

Page: 22 / 26

Page 22
LCD Remote Manual
APPENDIX
Max Branch Amps (BCR)
The LCD remote can be set for the max branch amps of the battery charger. This is done by setting DIP switch 1.
DIP switch 1 in the up position sets the BCR at 30 AC amps. DIP switch 1 in the down position sets the BCR at 15
AC amps.
NOTE: This function is only applicable when connected to an inverter/charger. When connected to a converter,
the DIP switch will have no function.
NOTE: Changes to the DIP switches will not take effect until the LCD remote has been reset. The display can be
reset by removing and reinstalling the cable attached to the RJ45 connector on the rear. Alternatively, the display
may be reset by removing all power sources from the unit.
Figure 1 DIP Switches Positions