Sensata Dimensions 141537, Owner'S Manual

Page: 9 / 26

Page 9
Operation
LCD Remote Manual
CHGR POWER DRAW
LIMIT 20 AMP AC
External Power Mode (Using the LCD Remote) Continued
Battery Charger Continued
Charger Current Limit
If the total AC input current into the charger exceeds the branch circuit rating of the inverter (as set by the LCD or
other method), the charger will reduce the battery charging current. When in this mode, the following message will
be displayed:
NOTE: If replacing an older model LCD (such as PN 141519 or 141522), the connected inverter may only be
allowed to change the setting for the charger current limit. This setting may be adjusted on the updated LCD
according to the procedure on page 10 of this manual.
Temperature Compensation Cable or Dongle
If the temperature compensation cable or dongle is not connected to the “Temp. Sense” connector on the inverter;
the battery charger will not function, the red “Read Display” LED will come on, and the display will show:
If the display is off, press the “Display” button. Check to make sure that the cable is connected to the inverter.
CHARGER -OFF
CHECK BATT PROBE
Battery