Plug the USB cable into the USB port located on the top of the meter and connect the other
end of the USB cable to a suitable PC.
Note:
The PC must have suitable software installed to receive and process the data being
transmitted from the meter.
From the Setup screen (refer to
Section 5 Meter Setup
), press
◄
or
►
until PC is displayed.
Press button to enable the Data Communication mode,
MEM
will be displayed.
Press button to transmit data to an external certified PC.
After data transmission is complete, the meter will return to the Setup Menu.
Section 7 Data/Communication
Data Transfer/Transmission
Deleting Data
To delete all data from the meter database, enter the Setup Menu (refer to
Section 5 Meter
Setup
). Press
◄
or
►
until
dEL
is displayed.
28
Summary of Contents for Hemo Spark
