Sensa Core Hemo Spark, User Manual

Page: 19 / 39

The hour and minutes will appear at the top of the display. They will be separated by a colon,
with flashing hour.
Press ◄ or ► until the correct hour is displayed. Press to save and proceed to setup minute.
Note: The meter will display AM or PM if the 12H time setting is chosen.
Minutes will flash. Press ◄ or ► until the correct Minutes are displayed. Press button
to save and proceed to Test Number Reset Setup.
Time Setup
Test Number Reset Setup
Press ◄ or ► to turn the test number reset ON or OFF . The test number will reset to 1 for
each new day of testing when the test number reset is turned on. Press to save and proceed
to setup unit.
“ OFF ” means test number will continue the last number when meter turns off at last time.
“ On ” means test number will start from No. 1 and do not continue the last number.
Press button to save.
Units Setup
Press ◄ or ► to select either g/dL , g/L , or mmol/L .
OR OR
Press button to save.
Sound Set Up
Press ◄ or ► to turn the sound ON or OFF . The Sound Symbol will appear on the display
when the sound is turned on. Press button to save and return to the setup screen.
Press ◄ or ► until Elt is displayed and press button to exit setup. The screen will briefly
go blank and display the initial screen.
mmol/L g/dL
19