Sensa Core Hemo Spark, User Manual

Page: 16 / 39

Section 5 Meter Setup and Options
With the meter turned on, long press setup button to enter Meter Setup
mode shown below.
Press button to display several setup sub-modes. Press or to select and press
button to enter following setup sub-modes: ◄ ◄
No. SEt
Test number setup. The test number can be from 1 to 999.
Refer to Page 17
CHE
Optical Check mode. Refer to Section 8
SYS
System Setup mode. Refer to Page 18
PC Data transfer mode. Refer to Section 7
dEL Deleting Data mode. Refer to Section 7
Exit setup mode. Confirm exit by button
n
16