Sennheiser VMX OFFICE, Instruction Manual

Page: 21 / 28

17
En
gl
ish
To accept the call when the headset is
not switched on :
왘
Open the microphone boom
햵
.
The headset is switched on and the
call is answered immediately without
any further action (there might be a
delay depending on the type of
mobile phone you use).
왘
Put the headset on your ear.
왘
Start to talk.
Accepting a mobile phone call
When you receive a call via your mobile
phone you hear a different ring tone in
the headset. In addition, the headset
LED
햳
flashes quickly.
왘
Press the hook button
햶
.
A wireless link is established between
headset and mobile phone.
왘
Start to talk.
If no ring tone is heard in the headset:
왘
Press and hold the hook button
햶
for
approx. two seconds.
The Headset will then answer the
mobile phone call.
Making a call via the base station
왘
Press either the base station PHONE
button
쐇
( ) or briefly press the
headset hook button
햶
.
A wireless link is established between
the headset and the base station.
왘
If no automatic handset lifter is
installed to your fixed line phone, pick
up the phone handset manually.
The link to the phone is established
and the dial tone is heard.
왘
Dial the number and talk.
Making a call with the mobile phone or
Bluetooth device
Make sure the headset and the mobile
phone are connected. If not see “Pairing
to a mobile phone” on page 13.
왘
Dial the number and talk.
Redialling with the mobile phone
Automatic redialling the last number is
only possible with certain mobile phone
or Bluetooth devices. Please refer to
your Mobile phone or Bluetooth device's
manual.
왘
Quickly press the headset hook
button two times.
The last dialled number is redialled.
Voice dialling
The voice dialling function must be
supported by your mobile phone or Blue-
tooth device and be activated.
왘
Make sure the recording of your code
word of the voice dialling function is
done with the headset as the headset
provides a better sound quality than
If an automatic handset
lifter is installed to your
phone, it picks up the
handset automatically.
Some mobile phones
require several double
pushes on the headset
hook button to start redial-
ling.