Sennheiser VMX OFFICE, Instruction Manual, Page: 19 / 28

15
En
gl
ish
4. With the USB wall plug available as
an accessory.
If the battery is completely drained, the
headset LED
햳
flashes red in the begin-
ning of the charging process. During
charging, the headset LED
햳
lights up
red. When charging is complete, the
headset LED
햳
lights up blue.
1. Charging in the base station charging
slot
왘
Take off the headset and close the
microphone boom
햵
.
The headset is switched off.
왘
Put the headset in the charging
slot
쐃
.
The headset LED
햳
lights up red.
2. Charging with the VMX OFFICE car
charger unit
왘
Take off the headset.
왘
Connect the small plug of the USB
charging cable to the socket for
power supply
햴
.
왘
Connect the USB plug of the USB
charging cable to the USB socket of
the VMX car charger unit.
왘
Connect the car charger unit to the
cigarette lighter in the car.
3. Charging with a USB socket
왘
Take off the headset.
왘
Connect the small plug of the USB
charging cable to the socket for power
supply
햴
.
왘
Connect the USB plug of the USB
charging cable to a USB socket of a
computer.
4. Charging with the USB wall plug
available as an accessory
왘
Take off the headset.
왘
Connect the small plug of the USB
charging cable to the socket for power
supply
햴
.
왘
Connect the USB plug of the USB
charging cable to the USB socket of
the power supply
왘
Connect the power supply to the
mains.
Wearing the headset
왘
Open the microphone boom
햵
.
The headset is turned on. The head-
set LED
햳
starts flashing slowly in
blue.
왘
Put the headset on. The headset can
be worn on either the left or right ear.
왘
Turn the microphone boom
햵
towards your mouth.
When you leave the head-
set on while it is being
charged, the headset
remains connected to the
base station.
When a call comes in via
the base station, just
remove the charging cable.
The headset will be ready
immediately to answer the
call.