![background image](http://html1.mh-extra.com/html/sennheiser/vmx-office/vmx-office_instruction-manual_1241459012.webp)
8
En
glish
Type 2:
Connecting the base station to a usual
fixed line phone
왘
Disconnect the handset from your
fixed line phone, but leave it on the
phone.
왘
Plug the free handset cable connector
to the base station HANDSET
socket
쐅
.
왘
Connect the cable which is already
connected to the base station
(PHONE socket
쐈
) to the fixed line
phone socket where the handset
cable was connected before.
To test the phone connection:
왘
Pick up the handset.
If the dial tone is heard in the hand-
set, the system is connected properly.
If no dial tone is heard, please refer to
“Adjusting to your fixed line phone”
on page 12.
Type 3:
Connecting the base station to a fixed
lined DHSG phone
왘
Connect the accessory cable (RJ 45
DHSG cable, not included) to the
AUX/DHSG socket
씈
and to the DHSG
phone.
To test the phone connection:
왘
Make sure the base station AUX
LED
쐄
is on. If not:
Press the AUX button
쐏
(
).
The AUX LED
쐄
is on now.
왘
Put on the headset.
왘
On the headset, press the hook
button
햶
.
If the dial tone is heard in the hand-
set, the system is connected properly.
If no dial tone is heard, please refer to
“Adjusting to your fixed line phone”
on page 12.
쐅
쐈
To connect special phones
with call control please ask
your service partner.
씈
Summary of Contents for VMX OFFICE
Page 2: ......
Page 3: ...English Nederlands Norsk Svenska Deutsch Fran ais Italiano Espa ol Portugues Dansk...
Page 4: ......