background image

Configuring the receiver

18 | 

Tourguide 1039 

Adjust the squelch threshold – with the transmitter switched off – to the
lowest possible setting that suppresses hissing noise.

The squelch should only be switched off for servicing or test purposes. With
the squelch threshold set to “

Low

”, you switch the squelch off by keeping the

DOWN rocker button pressed for 3 seconds.

Activating the limiter of the headphone output – “Limiter”

Possible settings: “

On

”, “

Off

The limiter reduces the maximum volume at the headphone output by –12
dB.

Adjusting the contrast of the display panel – “LCD Contrast”

You can adjust the contrast of the display panel in 16 steps.

Displaying the software version – “Software Revision”

You can display the current software version of the receiver.

For information on software updates, visit the EK 1039 product page at
www.sennheiser.com.

WARNING

Danger of hearing damage!

If you switch the squelch off or adjust the squelch threshold to
a very low value, loud hissing noise can occur in the receiver.
The hissing noise can be loud enough to cause hearing
damage!

Always make sure that the squelch is switched on.

Before adjusting the squelch threshold, set the volume of
the headphone output to the minimum (see page 11).

Never change the squelch threshold during a guided tour.

Only switch off the squelch for servicing or test purposes.

A high squelch threshold reduces the transmission range.

Upon delivery, the “

Limiter

” function is switched on. We recom-

mend to keep this function switched on at all times.

Setup

                Off

Limiter

Limiter

Limiter

Call up “Limiter”  

Select the desired 

setting

Store the setting

“Stored”

SET

SET

Off

On

Call up 

“LCD Contrast”  

Select the desired 

setting

Store the setting

Name

Setup

LCD Contrast

7

7

LCD Contrast

“Stored”

LCD Contrast

1 0

Summary of Contents for Tourguide 1039





























Reviews: