![background image](http://html1.mh-extra.com/html/sennheiser/tourguide-1039/tourguide-1039_instruction-manual_1242805020.webp)
Tourguide 1039
| 19
Configuring the receiver
Copying the receiver settings to additional receivers – “Copy”
Via the “
Copy
” menu item, you can copy all settings of one receiver (
A
) to an
arbitrary number of other EK 1039 receivers (
B
). This allows you to quickly
and easily transfer e.g. a new receiving channel to all other receivers in the
system.
To prepare the receiver (
A
) to transfer the settings:
왘
Select a receiver.
왘
Set the desired receiving channel, the name, the squelch threshold, etc.
왘
Change to the “
Copy
” menu item.
All settings of this receiver (
A
) will be transferred to the other receivers
(
B
).
To prepare the receivers (
B
) to receive the settings:
왘
Open the battery compartment cover of all receivers (
B
) to which you
want to transfer the settings.
왘
Switch on all receivers.
To copy the settings:
왘
Place the receiver (
A
) above the infra-red interfaces
of the other
receivers (
B
), one after the other. The distance between the infra-red
interfaces must not exceed 10 cm.
The settings are copied and “
Copy
” briefly appears on the display panels
of the receivers (
B
). If data transfer was successful, the receiver (
B
)
switches off automatically.
The “
Channels
” menu
Calling up the “
Setup Ch 1
” ... “
Setup Ch 32
” menu
Call up “Copy”
Deactivates the function
Data transfer function
“Copy” is active
Copy
Setup
SET
SET
Copy
A
B
max. 10 cm
Copy
Strong extraneous light may interfere with the data transfer via the
infra-red interface. Therefore, position the receivers so that any
possible interference caused by extraneous light is avoided. The
blue line between the infra-red interfaces
in the diagram on the
left indicates the direction from which the IR radiation must impinge
upon the receiver.
If you are using receivers from different frequency ranges and if you
have set a frequency that is not available in the frequency range of
the receiver (
B
), “
Incompatible Frequency
” appears on the display
panel.
왘
Use receivers from the same frequency range or set a frequency
that is available in both frequency ranges.
Call up
“Channels”
Select and call up
channel “1“ ... “32“
“Setup Ch 1” ...
“Setup Ch 32” menu
is reached
Setup
Channels
Channels
Setup Ch 2
S e t u p C h
2
Name