17
Adjusting settings via the operating menu
Adjusting settings via the operating
menu
The main menu “
Menu
”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to
−
60 dB, adjustable in steps of 3 dB
The transmitter’s audio level display “
AF
” always indicates the audio level,
even if the bodypack transmitter is muted, e.g. allowing you to check the
adjusted sensitivity before live operation.
The following figures are a guide to the best settings:
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the body-
pack transmitter. For more information, refer to the instruction
manual of the receiver. The relevant information is marked with
the sync icon.
For more detailed information on the operating menu, visit the
SK 100 G3 product page at www.sennheiser.com.
Input sensitivity
adjusted ...
Effect/display
... too high
Close talking distances, speakers with loud voices
or loud music passages cause overmodulation in
the transmission link. The yellow
AF PEAK
LED
lights up. The audio level display “
AF
”
shows full
deflection for the duration of the overmodulation.
... correctly
The audio level display “
AF
”
shows full
deflection only during the loudest passages.
... too low
The transmission link is undermodulated. This
results in a signal with high background noise.
Transmission situation
Sensitivity setting
Loud music/vocals
−
30 to
−
21 dB
Presentations
−
21 to 0 dB
Instrument input
Electric guitars with
single coil pickups
−
30 to
−
24 dB
Electric guitars with
humbucker pickups
−
45 to
−
30 dB
Guitars with active electronics
(active pickups, active EQs,
piezo pickups)
−
45 to
−
30 dB
Menu
–12 dB
S e n s i t i v i t y
– 12
dB
S e n s i t i v i t y
–36
dB
S e n s i t i v i t y
“Stored”
Call up
“Sensitivity”
Select the desired
setting
Store the setting
SET
SET
MHz
543.200
B.Ch: 20.12
MUTE
P
AF