8
Putting the bodypack transmitter into operation
Putting the bodypack transmitter into
operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack.
왘
Open the battery compartment by pushing the two catches
direction of the arrows and open the cover
왘
Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
왘
Close the battery compartment.
The battery compartment cover
locks into place with an audible
click.
Charging the accupack
To charge the BA 2015 accupack:
왘
Insert the bodypack transmitter into the L 2015 charger (optional
accessory).
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser micro-
phones and instruments (e.g. guitars). DC powering of the condenser
microphones is via the audio input (3.5 mm jack socket
MIC/LINE
).
왘
Use one of the recommended Sennheiser microphones or the optional
CI 1 instrument cable (see page 4).
왘
Connect the 3.5 mm jack plug
from the Sennheiser microphone or
instrument cable to the 3.5 mm jack socket
MIC/LINE
.
왘
Lock the 3.5 mm jack plug by screwing down the coupling ring
of
the cable.
왘
Via the operating menu, adjust the sensitivity of the microphone/line
input (see page 17).
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.