![background image](http://html1.mh-extra.com/html/sennheiser/sk100-g3-bodypak-transmitter/sk100-g3-bodypak-transmitter_user-manual_1242960022.webp)
20
Adjusting settings via the operating menu
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the
MUTE
switch, refer to page 12.
Emulating guitar cables – “Cable Emulation”
Via the “
Cable Emulation
” menu item, you can emulate different guitar
cable capacities in order to influence the sound of your guitar.
Activating/deactivating the pilot tone transmission – “Pilot Tone”
The bodypack transmitter adds an inaudible pilot tone to the audio signal.
The receiver detects and evaluates the pilot tone, and is thus able to
identify the signal of the matching transmitter and mute all others. The
pilot tone supports the receiver’s squelch function.
Devices of the ew 100 G1 series (generation 1) do not support the pilot
tone function. Therefore, please observe the following when combining a
bodypack transmitter or receiver of the ew 100 G3 series (generation 3)
with devices from an earlier evolution wireless generation:
Adjusting the contrast of the display panel – “LCD Contrast”
You can adjust the contrast of the display panel in 16 steps.
Mode
Function
“
AF
On/Off
”
When the switch is in the
MUTE
position,
no audio signal is transmitted.
“
RF On/Off
”
When the switch is in the
MUTE
position,
the RF signal is deactivated.
“
Disabled
”
The muting function is deactivated.
Transmitter
Receiver
Make sure to ...
w G3/
w G2
w G3/
w G2
... activate the pilot tone
function on both bodypack
transmitter and receiver.
w G3
w G1
... deactivate the pilot tone
function on the ew 100 G3
bodypack transmitter.
w G1
w G3
... deactivate the pilot tone
function on the ew 100 G3
receiver.
Call up
“Mute Mode”
Select the desired
setting
Store the setting
Advanced
Menu
Mute Mode
Mute Mode
Mute Mode
RF On/Off
AF On/Off
AF On/Off
“Stored”
SET
SET
Select the
desired setting
Store the setting
Cable Emulation
Call up
“Cable Emulation”
Advanced
Menu
Cable Emulation
Medium
Medium
Cable Emulation
High
“Stored”
SET
SET
Call up
“Pilot Tone”
Select the
desired setting
Store the setting
Name
Advanced
Menu
Pilot Tone
A c t i v e
A c t i v e
P i l o t
I n a c t i v e
P i l o t
“Stored”
SET
SET