Sennheiser SDC 3000, System Manual

Page: 83 / 126

Creating, opening and saving configuration files
85
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Creating, opening and saving configuration files
All conference-relevant information such as the names of the participants,
the seating arrangement, etc. as well as the configuration of the entire
conference system are saved in a configuration file. You can create and
save configuration files for conferences of all types and sizes.
In order to configure a conference, you will need approximately 1 1/2 to
2 minutes per conference console, i.e. configuring a conference with
45 participants will take 1 to 1 1/2 hours.
Note:
In order to be able to configure a conference, it is not necessary that
the conference consoles are connected.
When opening a previously created configuration on the PC of your
conference system, you only have to assign the microphone addresses
(see “Assigning microphones to the conference console icons” on
page 102) and start the conference management program. The
conference can now begin.
[New] Creating a new configuration file
Before you can control a conference via the SDC 3000 software for the first
time, you must first create a configuration file.
Start the “SDC 3000” program.
The “SDC 3000” dialog box opens.
Click the “Edit / Create Configuration” option in the “Select” box and
confirm your selection by clicking
.
The configuration program starts.
From the “File” menu, choose “New” or click [New Configuration] on
the toolbar.