Sennheiser SDC 3000, System Manual

Page: 81 / 126

The menus of the configuration program
83
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
The menus of the configuration program
The commands of the five menus allow you to configure your conference
and save all settings in a
*.cfg
file.
The “File” menu
The commands of the “File” menu allow you to open, save and close a
configuration file.
With the “Start Control” command, you can start the conference
management program.
The “Exit” command allows you to exit the program.
The “Configure” menu
The command “SDC Environment” on the “Configure” menu opens the
“Environment Configuration” dialog box via which you can specify several
technical details as well as the conference mode. Pressing the “F6” key also
opens the dialog box.
The “Editor” menu
The “Editor” menu allows you to edit a configuration and to open the
corresponding dialog boxes. Alternatively, you can press the “F3”, “F4”, or
“F5” key.
The bottom three commands of the menu are used to control the design of
the “Editor” dialog box and the conference console icons displayed.
The “Window” menu
The “Window” menu displays a list of all dialog boxes that are open within
the screen.
A check mark in front of the dialog box name indicates that the dialog box
is active (its title bar is displayed in blue).
If no check mark is displayed in front of the name of a dialog box this
indicates that the dialog box is not active (its title bar is displayed in grey)
or that the dialog box is in the background.
You can click on a dialog box name in order to activate the dialog box and
bring it to the foreground of the screen.