16
Adjusting settings via the operating menu
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the
MUTE
switch
쐎
, refer to page 8.
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
The plug-on transmitter adds an inaudible pilot tone to the audio signal.
The receiver detects and evaluates the pilot tone, and is thus able to
identify the signal of the matching transmitter and mute all others. The
pilot tone supports the receiver’s squelch function.
Devices of the ew 100 G1 series (generation 1) do not support the pilot
tone function. Therefore, please observe the following when combining a
transmitter or receiver of the ew 100 G3 series (generation 3) with devices
from an earlier evolution wireless generation:
Adjusting the contrast of the display panel – “LCD Contrast”
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu – “Reset”
When resetting the settings made in the operating menu, only the
selected settings for the pilot tone and for the frequency bank “
U
” remain
unchanged. For an overview of the factory-preset default settings, refer to
the enclosed frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the plug-on transmitter.
Mode
Function
“
AF
On/Off
”
When the switch is in the
MUTE
position,
no audio signal is transmitted.
“
RF On/Off
”
When the switch is in the
MUTE
position,
the RF signal is deactivated.
“
Disabled
”
The muting function is deactivated.
Transmitter
Receiver
Make sure to ...
w G3/ w G2
w G3/ w G2
... activate the pilot tone function
on both transmitter and receiver.
w G3
w G1
... deactivate the pilot tone function
on the ew 100 G3 transmitter.
w G1
w G3
... deactivate the pilot tone function
on the ew 100 G3 receiver.
Call up
“Mute Mode”
Select the desired
setting
Store the setting
Advanced Menu
Mute Mode
Mute Mode
Mute Mode
RF On/Off
AF On/Off
“Stored”
SET
SET
Call up
“Pilot Tone”
Select the desired
setting
Store the setting
Name
Advanced Menu
Pilot Tone
A c t i v e
Pilot
I n a c t i v e
Pilot
“Stored”
SET
SET
Select the desired
setting; apply the
setting
Call up “Reset”
Advanced Menu
Reset
Yes
Reset
“Stored”
SET
SET
All manuals and user guides at all-guides.com