background image

©2012 CAD Audio  Part No. 62070-03-00 Sept2012

TM

 WX1200

Wireless Microphone System

Manual and

Quick Start-up Guide

Individuals with cardiac pacemakers and other similar medical devices 

should consult with their physician before using any RF devices.  

Though the output level of this wireless system is below 50 milliwatts, 

the proximity of the transmitter to the implant device could pose a 

threat.

As with any wireless product, environmental conditions can reduce or 

in some cases prohibit a successful connection between the transmitter 

and the receiver.  

This device complies with Part 15 of the FCC Rules. Most users of 

CAD Audio wireless products in the United States do not need a license 

for operation.  However, the rules for unlicensed operation state that 

this device must not operate in excess of 50 milliwatts and it must not 

cause harmful interference to other wireless devices, and must accept 

interference received from other devices.  Wireless products meeting 

CAD factory standards adhere to these rules.  The FCC reserves the right 

to change these rules at any time.  For more information contact the 

FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless 

microphone website at:

www.fcc.gov/cgb/wirelessmicrophones 

Summary of Contents for WX1200

Page 1: ...ween the transmitter and the receiver This device complies with Part 15 of the FCC Rules Most users of CAD Audio wireless products in the United States do not need a license for operation However the rules for unlicensed operation state that this device must not operate in excess of 50 milliwatts and it must not cause harmful interference to other wireless devices and must accept interference rece...

Page 2: ... for instantaneous and First the receiver conducts an environmental frequency evaluation then selects a channel Second the receiver links to the transmitter and sets the transmit frequency automatically AA batteries for more than 10hrs of continuous operation Transmitters have soft touch On Mute switches with multi color LED indicators Metal Chassis for a durable and formidable shielded enclosure ...

Page 3: ...nel display Diversity indicator LED Select button manual selection of receiver channel BodypackTX1210Transmitter IR Node for Scan Link TM operation 4 pin connector TB4M type 3 Color LED indicator Green Transmitter is powered up and audio is live Orange Transmitter is powered up and audio is muted Flashing Red Low battery status change battery ASAP Power Switch Soft touch switch Holding the switch ...

Page 4: ...ding the switch for 2 seconds turns the transmitter on or off Quick momentary press of the switch mutes or unmutes the audio Tri color LED indicator Green transmitter is powered up and audio is live Orange transmitter is powered up and audio is muted Flashing Red low battery status change battery ASAP IR node for Scan Link TM operation Microphone Operating Principal Moving coil dynamic Polar Patte...

Reviews: