7
Using the plug-on transmitter
Using the plug-on transmitter
To establish a transmission link, proceed as follows:
1. Switch the diversity receiver on (see the instruction manual of the
receiver).
2. Switch the plug-on transmitter on (see next section).
The transmission link is established and the diversity receiver’s RF level
display “
RF
” reacts.
If you cannot establish a transmission link between plug-on transmitter
and receiver, read the chapter “Synchronizing the plug-on transmitter
with a receiver” on page 17.
Switching the plug-on transmitter on/off
To switch the plug-on transmitter
on
(online operation):
To switch the plug-on transmitter
off
:
왘
If necessary, deactivate the lock mode (see page 8).
To
switch
the plug-on transmitter
on
and to
deactivate the RF signal on
switch-on
(offline operation):
It is vital to observe the notes on frequency selection on page 17.
왘
Press the
ON
/
OFF
button
쐊
.
The plug-on transmitter transmits an RF signal. The red
ON
LED
쐆
lights up and the “
Frequency/Name
” standard
display appears on the display panel. The transmission icon
햵
is displayed.
You can switch the plug-on transmitter on and deactivate the RF
signal on switch-on. For more information, see below.
왘
Keep the
ON
/
OFF
button
쐊
pressed until “
OFF
” appears on
the display panel.
The red
ON
LED
쐆
goes off and the display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
쐊
will
cancel your entry (ESC function) and return you to the current
standard display.
왘
Keep the
ON
/
OFF
button
쐊
pressed until “
RF Mute On?
”
appears on the display panel.
왘
Press the
SET
button.
The transmission frequency is displayed but the plug-on
transmitter does not transmit an RF signal. The transmission
icon
햵
is not displayed.
Use this function to save battery power or to prepare a plug-on
transmitter for use during live operation without causing
interference to existing transmission links.
쐆
쐊
ON/OFF
ON/OFF
ON/OFF
SET
MHz
533.875
ew100 G3
MUTE
P
AF
햵
All manuals and user guides at all-guides.com
