![background image](http://html1.mh-extra.com/html/sennheiser/ek-6042/ek-6042_instruction-manual_1242690016.webp)
16
|
EK 6042
Using the EK 6042
- If you call up the operating menu from the standard display, the
MAIN
Format
menu item is displayed.
- If you call up the operating menu from the CH1 display, the
CH1
Settings
menu item is displayed.
- If you call up the operating menu from the CH2 display, the
CH2
Settings
menu item is displayed.
Overview of the operating menu
Main
menu
Submenu
Possible settings
CH1
Settings
CH2
Settings
Trans-
mitter
Search via IR
: Detects the transmitter via the
infra-red interface
List
: Selects a transmitter from the list
Frequency Scan to next
: Automatically searches a suitable
frequency on the basis of the
Squelch
setting
Tune
: Manually sets the frequency
License
: Selects a frequency preset
Sync
Transfers the frequency to the transmitter using
the infra-red interface; see “Performing a syn-
chronization (Sync)” on page 17
Pilot
Squelch
inactive
: Pilot tone evaluation is deactivated
active
: Pilot tone evaluation is activated
not supported
: Transmitter does not support
the pilot tone function
Squelch
Analog reception: Adjusts the squelch threshold
Digital reception:
inactive
MAIN Out
AUX Out
always ON
: Audio output is always activated
ON by command
: Audio output can be activated
via the command function
MUTE by command
: Audio output can be muted
via the command function
Channel
Power
inactive
: Audio signal is muted at all output
sockets and only active at the headphone
output
active
: Audio signal is active at all output
sockets
MAIN Format
digital AES-3
or
analog
Level MAIN 1
Level MAIN 2
Digital reception:
digital
Analog reception: Adjusts the audio level