![background image](http://html1.mh-extra.com/html/sennheiser/ek-6042/ek-6042_instruction-manual_1242690013.webp)
EK 6042
| 13
Putting the EK 6042 into operating
Connecting the backpanel adapter
In order to use the EK 6042 remotely from your video camera (e.g. on a
portable mixing console), you require the GA 6042 BP backpanel adapter
as well as an external power supply.
Connecting the accupack adapter
In order to power the EK 6042 with accupacks, you require the GA 6042 BA
accupack adapter, two BA 61 accupacks and the L 60 charger:
왘
Carefully slide the EK 6042 completely into the back-
panel adapter.
왘
Secure the EK 6042 to the backpanel adapter using the
two supplied screws.
왘
Use two Y-adapter cables to connect the primary and –
if desired – the secondary audio outputs to your mixing
console (see page 14).
왘
Use the CA 6042 DC DC-IN cable to connect an external
power supply to the
DC-IN
socket or mount the
GA 6042 BA accupack adapter (see below).
You can remove the belt clip of the backpanel
adapter.
왘
Mount the backpanel adapter
1
(see
above).
왘
Slide the accupack adapter
3
to the
correct side of the backpanel adapter so
that the connector of the accupack
adapter
6
connects to the socket for
accupack
5
.
왘
Secure the accupack adapter to the back-
panel adapter using the two supplied
screws
4
.
왘
Slide the two BA 61
2
onto the accupack
adapter until they lock into place with an
audible click.
You can replace one of the accupacks
at any time, even during operation.
If one accupack is replaced, the
second accupack takes over the
power supply.
1
2
3
4
2
5
6